CA Series-770CA30 PEEK Carbon Fiber Reinforcement manufacturer from China Jilin Joinature Polymer Co.,Ltd.

CA Series-770CA30 PEEK Carbon Fiber Reinforcement

Price:	100.0 RMB
Payment Terms:	T/T,L/C
Place of Origin:	Jilin, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

CA Series-770CA30 carbon fiber filled peek reinforcement is widely used in automobile and aviation fields.

CA Series-770CA30 carbon fiber filled peek reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or even avoid the use of lubricants.

Specification of CA Series-770CA30 PEEK Carbon Fiber Reinforcement

Material Properties	Test Method	Conditions	Units	770G
Mechanical Data
Tensile Strength	ISO 527	B reak,23℃	MPa	-
Tensile Strength	ISO 527	Y ield,23℃	MPa	100
Tensile Elogation	ISO 527	Break,23℃	%	45
Flexural Strength	ISO 178	Break,23℃	MPa	-
Flexural Strength	ISO 178	Y ield,23℃	MPa	165
Fleoural Modulus	ISO 178	23℃	Gpa	4.1
Compressive Strength	ISO 604	23℃	MPa	125
Charpy Impact Strength	ISO 179/leA	Notched	kJm-2	7
Charpy Impact Strength	ISO 179/IU	Unnotched	kJm-2	-
Izod Impact Strength	ISO 180/A	Notched	kJm-2	7.5
Izod Impact Strength	ISO 180/U	Unnotched	kJm-2	-
Mould Shrinkage	ISO 294-4	Along flow	%	1
Mould Shrinkage	ISO 294-4	Across flow	%	1.3
Thermal Data
Melting Point	ISO 11357		℃	343
Glass Tansition (Tg)	ISO 11357	Onset	℃	143
Special Heat Capacity	DSC	23℃	kj kg-1℃-1	2.2
Coefficient of Thermal Expansion	ISO 11359	Along flow below Tg	ppm K-1	45
Coefficient of Thermal Expansion	ISO 11359	Along flow above Tg	ppm K-1	120
Heat Deflecion Temperature	ISO 75A-f	1.8Mpa	℃	152
Thermal Conductivity	ASTM C177	23℃	W m-1K-1	0.29
Flow
MeltIndex	ISO 1133	380℃,5kg	g10min-1	10
Miscellaneous
Density	ISO 1186	Crystalline	gcm-3	1.3
Density	ISO 1186	Amorphous	gcm-3	1.26
Shore D Hardness	ISO 868	23℃		85
Water Absorption(3.2mm thick Tensile Bar)	ISO 62-1	24h,23℃	%	0.07
by immersion		Equilib riu m,23℃	%	0.4
Electrical Data
Dielectric Strength	IEC 60243-1	2mm	kV mm-1	23
Comparative Tracking Index	IEC 60112		V	150
Dielectric Constant	IEC 60250	23℃,1kHz		3.1
Dielectric Constant	IEC 60250	23℃,50kHz		3
Loss Tangent	IEC 60250	23℃,1MHz		0.004
Volume Resistivity	IEC 60093	23℃,1V	Ω cm	10 16
Volume Resistivity	IEC 60093	275℃	Ω cm	10 9

As a professional PEEK material supplier, ZYPEEK provides quality plastic PEEK materials wholesale with excellent properties. Our PEEK raw material line includes Grade G PEEK pure resin pellets, Grade PF PEEK pure resin fine powder, Grade R&D PEEK, etc. Contact ZYPEEK, your reliable PEEK material manufacturer, now!